SSX10 HPA adapter Gen 2

Name: SSX10 HPA adapter Gen 2
Brand: Bushmaster
Price: 30.00 EUR
Availability: InStock

€30,00

this HPA adapter is specifically designed for the Novritsch SSX10 so you can play without an airline.

READ CAREFULLY:

This adapter works with a polestar Micro regulator clones ( I got mine from Aliexpres). I don't control those manufacturers, so you might need to adapt yourself to make it work. I hope you understand I can't take responsibility for that.

-Maybe you need some light sanding/applying tape to make it snug

- I got feedback that some regulators have the PSI turning screw on the other side. Unscrewing the thread lock screws on the side and turning the bottom side of the regulator seems to work-maybe some white gas/air sealant tape is required to make it perfect air-tight.

This design/item is new.

The design, print orientation, print material and usage of metal screws makes this item strong enough for normal play. Let me know if something is not in order, besides guarantee with normal use, it helps me improve the design. Let make it better together!

Features:

tank stock adapter for a regulator + hpa tank
tournament lock (if you install your regulator correctly)
installation bolts & nuts included

Not included:

a polarstar micro regulator clone
some electrical tape for perfect fitment
HPA tank

installation video is on my Technical Support Page

Gen 2 has a new design which makes it stronger. If you have a gen 1, I will send the Gen 2 free of charge (only shipping cost)

Hi There! I am still using version 1. Never asked for version 2. I love it as it is. I have two builds with the wolverine wraith x system on my own polarstar kythera based builds so for me it is a releife and a very cost effective solution to have this adapter. I have made my ssx10 the same day when the HPA adapter arrived and now i am building my ssg10 A3 with your HPA adapter a wolverine bolt m and a full thrust kit from Novritsch ;) Keep up the good work and thank you for the innovative ideas !!!

If the hole for adjusting the HPA pressure is not aligned, loosen the 2.5 mm Allen set screws on the regulator housing and rotate the insert until it fits.

The original hose fits well into the 90° elbow without needing to be extended. The bend radius is fine.

Unfortunately, the adjustment screw is not accessible from the pressure gauge side, but from the air connection side. If it were the other way around, it would be easier to adjust the pressure.

Translated with DeepL.com (free version)